Product Description
We are currently updating product information please check product availability prior purchasing.
Click for Availability
Brake Bonders Part Finder
|
-
AUSTRALIAN OWNED & PRODUCED
-
?OVER 6 MILLION SHOES SOLD SINCE 1985
-
LARGEST BRAKE SHOE MANUFACTURER IN AUSTRALIA
-
100% OF RANGE RADIUS GROUND FOR PERFECT FIT THE FIRST TIME
-
MOST UP TO DATE RANGE WITH THE NEWEST APPLICATIONS AVAILABLE
|
|
Other Details
Subject to exclusions or as otherwise indicated all goods supplied by Clutch and Brake Australia (CBA) are warranted
against defects in design, manufacture and workmanship for a period of 12 months from Date of Fitment or 20,000
km, whichever occurs first. The benefits given under this warranty are in addition to the other rights and remedies
available to you under the Australian Consumer Law and/or other laws.
In accordance with the above statement the following may exclude products presented for warranty:
1. Any goods described, either written or implied, as performance or for use in motorsport, racing, off-roading
and/or time trials are not covered by this warranty unless the product is specifically designed for that activity.
2. Where vehicles are fitted outside of the original specification (i.e. conversions & high performance) the
warranty will not apply to the following: shudder, slip, different pedal feel, harsh engagement, maltreatment,
damage caused by collision or incorrect fitting of the part.
3. Where a defect has been the result of mistreatment of the vehicle or component.
4. Where a defect has been the result of incorrect handling, misalignment, use or fitment of the component.
5. Where goods are fitted to modified vehicles and/or modified to Heavy Duty Specifications and/or any other
specification and/or non original conversions.
6. Where goods have been fitted to incorrect or unlisted applications.
7. In the event of a failure of which the purchaser believes to be warrantable all components must be returned to
CBA within 30 days of said failure.
8. CBA will not accept any goods for warranty that have been modified or repaired unless by prior authorisation
from CBA.
9. No products will be accepted as warranty until the items have been inspected and found faulty by CBA or a
CBA appointed third party.
It is the responsibility of the supplier to return any products considered by the purchaser to be faulty to CBA.
Any claim for additional expenses including labour must be included with a completed Warranty Claim Form. These
claims must be substantiated with clear documentation such as a workshop invoice. Should the warranty be approved
these additional expenses will be assessed by CBA. As of January 2014, CBA will apply a maximum rate of $55 per
hour excluding GST based on time deemed fair and reasonable by CBA to remove and replace the warrantable
component concerned.
In the event that a product is found not to be warrantable the expense of claiming under this warranty shall be borne
by the Purchaser. CBAs liability does not extend to any indirect or inconsequential losses incurred by the Supplier or
the Purchaser.
It is the Repairers responsibility to ensure all new components compare in function and dimensions to the replaced
components and are correct for the application.
While all care will be taken to supply the correct goods the correct selection of products is the responsibility of the
Purchaser.
Product Videos
Custom Field
One Set 4 X Brake Shoes (Two Wheels)